HAVS still a Threat

I was recently contacted by Jerry Laws, the Editor of OH&S (Occupational Health and Safety Magazine) regarding the persistent problem of Hand-Arm Vibration Syndrome since we offer certified AV Gloves for workers with this chronic problem.

It’s the same problem I discussed back in a February post. To see my discussion with Jerry click on the title of this post. It’s an important and often overlooked issue.

I’m curious how many of you workers out there know about HAVS?

.

Glove Cut Resistant Symbol – EN388

Work glove hand protection standards have existed for years but most users fail to pay attention to the ratings. Specifically cut resistance. Both the ANSI (American National Standard Institute) and the EU (European Union) have hand protection selection criteria.

Although the criteria between both is very complex, I prefer seeing the EU – EN388 symbol since it rates the gloves for abrasion, blade cut, tear, and puncture resistance. ANSI doesn’t have a single symbol covering these categories. However, in situations requiring a very high level of cut resistance, you should look for gloves tested and rated under both standards since they vary on the high end in the cut resistant category.

In the EN-388 symbol (shown) you will see a number for each category. All tests are ranked 1-4 (4 being the highest level) except for the blade cut category ranking of 1-5.

I’m preparing a paper which will discuss this in detail but in the meantime, I think this symbol and simple explanation will help on the fly. You can always contact me if you have any questions or need any assistance on work glove and cut resistant glove selections.

FYI: Since the CE (EU) glove standards are mandatory in Europe and most gloves sold in North America are imported, you will see this symbol more often. You can click on the image to enlarge it and print it.

.

Be wary of eco-friendly glove claims

I saw this recent post with a title (Recycled Gloves) about gloves made from recycled materials. The post itself is a bit misleading since these gloves are also made using Kevlar, Polyester, and Neoprene. Not the kind of stuff you recycle; or “can be” recycled.

I investigated this claim further by going to the company’s web site and they clearly refer to gloves made from a “fabric” using recycled materials. Lame but maybe true. You see, I was weaned in the healthcare industry where you must substantiate such claims or references.

Don’t you think when a company refers to a recycled glove; it should be made from 100% recycled material? I welcome our comments.

.

Geisinger Study shows costs decrease, safety enhanced when hospitals, health clinics switch to powder-free latex gloves

Problems caused by latex gloves got me into the glove business 19 years ago. At that time, I developed special glove liners to protect healthcare professionals from latex allergies which we still sell today.

The conclusion to this study is not new information to us on the front lines of hand protection but we know many of you must be reminded that latex issues still exist. However, latex gloves have come along way since my Glovenaut days and the OSHA regulations regarding glove use in healthcare.

Also coincidental is that I worked with Geisinger Health Services and Hospital during my early years in the healthcare industry. To read a synopsis of the study, click on the title.

Let me know if you have a question about latex gloves. I have a file cabinet full of research information.

.

Coated Gloves – Determine function, fiber, and fit first

Coated gloves are my favorite industrial and work glove to talk about because they have become very comfortable, functional and versatile. In many cases they are replacing traditional leather work gloves. And, since it’s that time of year you might like to know that they also make great garden gloves, too.

Due to the introduction of new fibers and a vast selection of coating options many users became confused to find the right glove. So confused, that I found myself on the phone all day fielding their questions to lend a hand (pun intended) in selecting the correct glove for their situation.

That’s when I decided to write a primer on coated gloves which could be e-mailed to them as a reference and save some of their time and mine. That primer turned into an article which was published last year in Industrial Safety & Hygiene News. You can link to the primer here or go to the article by clicking on the title of this post.

As a matter of fact, coated gloves look good, too. I even used one model as the featured image on my Blog. Let me know if you found the primer or article helpful.

.

Online Matchmaking and Gloves

I call it High-Tech Glove Marketing

When I was asked late last year by the IGA (International Glove Association) to write an article (about gloves of course) for the annual IGA feature in Occupational Health & Safety magazine, I knew immediately that it would be helpful to enlighten OH&S subscribers about gloves and the internet. After all, we are (GO Gloves™) the oldest glove company on the net.

(Click on the Title to see the article or you can find it under our Media Tab on our web sites)

Death Row Glove’s Life Spared

Although I wouldn’t exactly call Sue Whitney a Glove Guru, she certainly has a talent for extending the life of Electrician’s Gloves. See her Blog and her glove project. (Pictured)

For those of you in the know, Electrician’s gloves become obsolete after 6 months unless retested and recertified. It’s the law and it’s a good one.

If you want to see more about these gloves before they fall into Sue’s hands (click here)

If your looking for other gloves to turn into projects (click here)

From the Halls of Montezuma to the shelves at Gloves-Online



Part of the initial verse from the oldest official song in the United States military seemed fitting to announce the arrival of the official white Military Dress Gloves of the US Military to our “hard to find” glove stock.

These military dress gloves are the official gloves purchased by DSCP (Department of Defense clothing supply unit) and made exclusively for the DOD in the USA. .

It took a little stiff arming to get my hands on these gloves even though I serve on the DOD Glove Technical Sub-Committee. Now they are an exclusive at GO Gloves and our military customers no longer have to settle for a second class dress glove. Even you die hard Dress Blue men and women warriors!

.

Good Good Good Good Vibrations

I thought of this classic Beach Boys song when I was drafting an article for “Modern Contractor” about anti-vibration gloves and (HAVS) Hand-Arm Vibration Syndrome. It’s a worthwhile read for those of you who work with any type of vibrating tools in your work.

You can also see our newest glove to prevent HAVS. See the new Ergodyne ProFlex Anti-Vibration Gloves. (Shown) Click on image to enlarge.

I’m not sure these gloves will keep giving you excitations but they are the only ANSI certified glove for this problem.

.

We have a Winner!

The glove auction for Santonio Holmes’ gloves wrapped up last weekend. The winning bid for these historical sport gloves was $70,200.00. I wonder if the marketing gurus at Reebok ever realized that they made gloves worth that much money. I guess we’ll see what they sell for next season.

To help you resolve your curiosity, I was not the winner. The winning bidders name is not yet known.